Home/Printer Error Codes/Brother/Media Mismatch

Brother Media Mismatch: Paper type setting does not match

Also shows as: Media Type Mismatch

✅ Usually fixable yourself

Brother says the media type set in the printer driver differs from the paper type set in the machine's menu.

What to try

  1. Load the correct type of paper in the tray shown on the display.
  2. Set the matching media type in the machine's Paper Type setting.
  3. When you change paper, update size and type on both the machine and the computer.
  4. Press Retry (or Go, depending on model).

When it needs a technician

Brother lists no service step for this message.

Which models show Media Mismatch

Brother documents this code for models including HL-L2350DW, HL-L2390DW, HL-L5200DW, HL-L6200DW, MFC-L2710DW, MFC-L2750DW, MFC-L3780CDW, DCP-L2550DW.

First steps for any printer error

  1. Write down the exact code before you do anything else — similar-looking codes often mean completely different things.
  2. Power the printer off, unplug it for a couple of minutes, then power it back on. A surprising number of transient errors clear here.
  3. Open the covers and check for paper scraps, packaging material, or anything blocking the carriage.
  4. Check the cartridges or tanks are genuine, correctly seated, and not empty.
  5. Confirm the printer is plugged directly into a wall outlet, not a power strip or extension lead.
  6. Check your model’s own manual — codes are model-specific, and the manual is the authority for your machine.

Source: Brother Support FAQ - Media Type Mismatch or Media Mismatch (HL-L2350DW). Codes are model-specific, so your own model's manual is the final word. Reviewed October 2026.

Still showing Media Mismatch?

Tell our printer technician your model and what you've tried. You'll find out whether it's fixable at home or worth repairing at all.

Ask about my printer — $1

Eric Paul Amora · Printer & Hardware Repair Technician

Related Brother codes

Print Unable XX — Laser printer mechanical issueDrum End Soon — Drum unit near end of lifeReplace Drum — Time to replace the drum unitDrum Error — Corona wire dirty or drum not seatedToner Low — Toner cartridge running lowToner Ended — Out of tonerNo Toner — Toner cartridge not detectedCartridge Error — Toner cartridge not seatedWrong Toner — Toner cartridge not compatibleCannot Detect — Cartridge not detectedJam Inside — Paper jammed inside the machineJam Rear — Paper jammed in the back

All 50 Brother error codes and models →

← All printer error codesTech support