Brother Drum End Soon: Drum unit near end of life

Usually fixable yourself. Brother does not list a service step for this message; it is a supply warning.

✅ Usually fixable yourself

Brother says "Drum End Soon" means the drum unit is near the end of its life. You can keep printing while it shows.

What to try

Keep printing until print quality drops or "Replace Drum" appears.
Order a new drum unit now so it is ready (the drum is separate from the toner cartridge).
When you install the new drum, reset the drum counter.
If the message stays after a new drum is installed, the drum counter was not reset.

Brother does not list a service step for this message; it is a supply warning.

Brother documents this code for models including HL-L2350DW, HL-L2370DW, HL-L2390DW, HL-L2460DW, MFC-L2710DW, MFC-L2750DW, DCP-L2550DW, MFC-L8900CDW.

Write down the exact code before you do anything else — similar-looking codes often mean completely different things.
Power the printer off, unplug it for a couple of minutes, then power it back on. A surprising number of transient errors clear here.
Open the covers and check for paper scraps, packaging material, or anything blocking the carriage.
Check the cartridges or tanks are genuine, correctly seated, and not empty.
Confirm the printer is plugged directly into a wall outlet, not a power strip or extension lead.
Check your model’s own manual — codes are model-specific, and the manual is the authority for your machine.

Source: Brother Support FAQ - Drum End Soon (HL-L2350DW). Codes are model-specific, so your own model's manual is the final word. Reviewed October 2026.

Tell our printer technician your model and what you've tried. You'll find out whether it's fixable at home or worth repairing at all.

Eric Paul Amora · Printer & Hardware Repair Technician